Cart  |  Contact  |  Help  | 
Toll-Free in India 000 800 442 0175
International+65 6415 5353

Heavy Weight Oil Flanged Immersion Heaters

TMO Series

Oil Heaters | TMO Series

Oil Heaters

RoHS
  • Rugged Steel Sheath
  • Low Watt Density 6 1/2" W/in2
  • 1.2 to 8.4 kW
  • 3 & 5 Inch, 150 Ib. Steel Flange
Immersion Heaters - View related products

Description

FEATURES
Rugged construction, Sturdy 0.475" diameter elements welded to steel flanges provide superior rigidity and strength. Heavy duty jumper straps and terminal posts assure permanent tightness of connection’s carrying capacity.

High conductivity elements — Filled with highest purity blends of magnesium oxide refractory (MgO) compacted to a rock hard density to insure maximum thermal conductivity, maximum electrical resistance, and assure long element life.

Heavy coil construction– Watt density on the heating coil is designed for low watt density operation by increasing the coil diameter and length to give maximum coil surface temperature, providing longer coil life.

APPLICATIONS
Heating heavy, viscous oils reduces their viscosity, permitting better pumpability for transfer operations. Lowering the viscosity allows increased system flows for any given horsepower. Transfer system designs can employ smaller motor and drive components ensuring optimum system economy.

Preheating permits use of less expensive fuel oils, allows easier pumping and provides better atomization, increasing combustion efficiency.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.



kW Dim. B
in. (cm)
Wt.4
Ib. (kg)
E1 General Purpose Enclosure1 Dim.N3
in. (cm)
3 Inch-150 Lb. Steel Flange, 3 Steel Sheath Elements — 6.5 W/in2
1.225 3/16 (64)17 (8)TMO-3012L/240V/3P1 (3)
1.6533 1/16 (84)18 (8)TMO-3016L/240V/3P1 (3)
240 9/16 (103)20 (9)TMO-3021L/**/3P1 (3)
2.548 1/16 (122)21 (10)TMO-3024L/240V/3P1 (3)
5 Inch-150 Lb. Steel Flange, 6 Steel Sheath Elements — 6.5 W/in2
1.518 1/16 (46)27 (12)TMO-6015L/240V/3P1 (3)
1.819 13/16 (50)30 (14)TMO-6018L/240V/3P1 (3)
2.425 3/16 (64)32 (15)TMO-6024L/240V/3P1 (3)
3.333 1/16 (84)33 (15)TMO-6033L/**/3P1 (3)
4.240 9/16 (103)34 (15)TMO-6042L/**/3P1 (3)
548 1/16 (122)37 (17)TMO-6049L/**/3P1 (3)
5.452 1/16 (132)38 (17)TMO-6054L/**/3P1 (3)
658 3/8 (148)40 (18)TMO-6060L/**/3P1 (3)
6.965 1/16 (165)42 (19)TMO-6069L/**/3P1 (3)
7.268 5/8 (174)43 (20)TMO-6072L/**/3P1 (3)
8.478 1/16 (198)46 (21)TMO-6084L/**/3P1 (3)
/** Designate voltage, i.e. insert 240V for 240 Vac or 480V for 480 Vac.
Note: Larger flange sizes and kW ratings and power supplies are available. contact OMEGALUX.
1 Heaters with General Purpose and Moisture Resistant Enclosures are UL Listed and CSA Certified.
2 Heaters with Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
3 E1 enclosure “N” designates conduit size, E2/E3/E4 enclosures “N” designates NPT threat size.
4 Weights:
    A. For Wt. of 3" flange with E2 enclosure, add 3 lbs. to Wt. of E1 enclosure.
    B. For Wt. of 5" flange with E3 or E4 enclosure, add 7 lbs. to Wt of E1 enclosure.
Place Order(Specify Model Number)
Part Number/Desc.
Qty
RoHS
Description
Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.
Quick Ship
TMO-6084L/480V/3P
Consult Sales  
Availability: 
 
RoHS compliant
Heater, 8.4 kW, 480 V, 6 steel sheath elements, 3 phase power
All amounts shown in USD

Part Number Builder

Build Your Part Number Below
Option Descriptions:


(1) Number of Steel Sheath Elements select from:
3 for 3 Steel Sheath Elements
6 for 6 Steel Sheath Elements

(2) Wattage select from:
012 for 1.2 kW
016 for 1.65 kW
021 for 2 kW
024 for 2.5 kW
015 for 1.5 kW
018 for 1.8 kW
024 for 2.4 kW
033 for 3.3 kW
042 for 4.2 kW
049 for 5 kW
054 for 5.4 kW
060 for 6 kW
069 for 6.9 kW
072 for 7.2 kW
084 for 8.4 kW

(3) Voltage select from:
240V for 240 V
480V for 480 V
Note: All combinations may not be valid, check spec sheet for valid part numbers.