Cart  |  Contact  |  Help  |  ininfo@dwyeromega.com  | 
Toll-Free in India 000 800 442 0175
International+65 6415 5353

Vibration Tested Thermistor Probes with M12 Connections

TH-21 Series

Thermistor Probes With M12 Connections | TH-21 Series

Thermistor Probes With M12 Connections

  • Maximum Continuous Use, 200°C (392°F)
    [Short Term Use to 250°C (482°F)] for Sensing End,
    85°C (185°F) Max at the Connector
  • Vibration Tested to ASTM-E1137: 3Gs from 5 to 500 Hz
  • Excellent Long Term Stability
  • Tolerance: ±0.2°C From 0 to 70°C (32 to 158°F)
  • Available in 2252, 3K, 5K and 10K Ω Resistances at 25°C (77°F)
Thermistor Elements, Probes and Assemblies - View related products

Description

The TH-21 Series thermistor probes are constructed with the 55000 Series glass encapsulated thermistor elements which provide excellent stability and accuracy. With a maximum continuous temperature rating of -80 to 200°C (-112 to 392°F), and intermittent operation to 250°C (482°F), these thermistor sensors can be used in applications previously out of reach of epoxy coated thermistor sensors. The probes can be ordered in any length but we highly recommend a minimum immersion depth of 1.5". Short probes run the risk of error due to stem conduction effects.

Specifications
Temperature Range: -50 to 200°C (-58 to 392°F) at Sensing End
Probe Connector Temperature: 85°C (185°F) Max
Thermistor Sensor: Refer to Table 1 on next page
Operating Current: 12 micro-amps
Insulation Resistance: 100 MΩ minimum at 100 Vdc at ambient temperature
Response Time: Approximately 7 seconds (50%), 8 seconds (63.2%), 14 seconds (90%) in water flowing at 0.91 m (3') per second
External Materials: 316L stainless steel sheath and housing except connector insert
IP Rating: IP67 with mating connector installed
Place Order(Specify Model Number)
Part Number/Desc.
Qty
Description
Standard 2252 Ω Thermistor
TH-21A-2252-1/4-0600-M12
USD136.00
Availability: 6 weeks
 
Straight sheath, 1/4'' diameter, 6'' long, M12 male connector
TH-21B-2252-1/4-0600-M12
USD136.00
Availability: 6 weeks
 
Straight sheath with 1/2 NPT mounting, 1/4'' diameter, 6'' long, M12 male connector
TH-21C-2252-1/4-0600-M12
USD136.00
Availability: 6 weeks
 
Straight sheath with 3/8 NPT mounting, 1/4'' diameter, 6'' long, M12 male connector
TH-21D-2252-1/4-0600-M12
USD136.00
Availability: 6 weeks
 
Straight sheath with 1/4 NPT mounting, 1/4'' diameter, 6'' long, M12 male connector
10K Ω Thermistor
TH-21A-10K-1/4-0600-M12
USD136.00
Availability: 6 weeks
 
Straight sheath, 1/4'' diameter, 6'' long, M12 male connector
TH-21B-10K-1/4-0600-M12
USD136.00
Availability: 6 weeks
 
Straight sheath with 1/2 NPT mounting, 1/4'' diameter, 6'' long, M12 male connector
Metric 2252 Ω Thermistor
TH-21A-2252-M6-0150-M12
USD136.00
Availability: 6 weeks
 
Straight sheath, 6 mm diameter, 150 mm long, M12 male connector
TH-21E-2252-M6-0150-M12
USD136.00
Availability: 6 weeks
 
Straight sheath with M8x1 mounting, 6 mm diameter, 150 mm long, M12 male connector
TH-21F-2252-M6-0150-M12
Consult Sales  
Availability: 
 
 
Straight sheath with M10x1 mounting, 6 mm diameter, 150 mm long, M12 male connector
TH-21G-2252-M6-0150-M12
Consult Sales  
Availability: 
 
 
Straight sheath with G1/2 mounting thread, 6 mm diameter, 150 mm long, M12 male connector
TH-21H-2252-M6-0150-M12
Consult Sales  
Availability: 
 
 
Straight sheath with G1/4 mounting thread, 6 mm diameter, 150 mm long, M12 male connector
All amounts shown in USD
Note: For lengths other than 6", change “-0600” in model number to required length and add $1 per inch greater than 6", (example: 9" = 0900, 41/2" = 0450).
For 1/8" probe diameters, change “-1/4” in model number to “-1/8”, no additional cost.
For 3K, 5K or 10K Ohm thermistor elements change “-2252” to desired resistance.
•For Dual element probes, add "-DUAL" to the end of the Model Number and multiply the price by 1.75
Ordering Example: (1) TH-21A-2252-1/4-0600-M12 Straight sheath, 1/4'' diameter, 6'' long, M12 male connector, USD136.00

Part Number Builder

Build Your Part Number Below
Option Descriptions:


(1) Design select from:
A for Plain no thread
B for 1/2 NPT mounting thread
C for 3/8 NPT Mounting thread
D for 1/4 NPT Mounting thread
E for M8x1 Mounting thread
F for M10x1 Mounting thread
G for G1/2 mounting thread
H for G1/4 mounting thread

(2) Diameter select from:
1/4 for 1/4 in diameter
M6 for 6 mm diameter

(3) Probe Length select from:
0600 for 6 in
0150 for 150 mm

(4) Additional Option select from:
Nothing(leave field blank) for None
-DUAL for Dual element version
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.