NMP Series will be available until Aug 30th 2018 Consider
SMPW Sereis as a possible alternative or contact our Temperature Engineering department.
NMP is available as a Legacy design.
The most current design is SMPW-CC . The demand for the SMPW version results in a lower initial cost. Features of the SMPW version produce a better-finished thermocouple with reduced wire assembly time.
View the features benefits and cost advantage of the current design, SMPW-CC-( )-( ), with the integral cable clamp.
† All amounts shown in USD Note: To order, specify "M" for male connector only, or "F" for female connector only.
Order male and female separately to create pairs.
Part Number Builder
Build Your Part Number Below
Thermocouple Type select from: K for Type K T for Type T J for Type J E for Type E R/S for Type R or S G for Type G C for Type C D for Type D U for Uncompensated or Type B N for Type N
Connector Contact select from: M for male connector F for female connector
ROHS select from: Nothing(leave field blank) for Non-ROHS -ROHS for ROHS
Note: All combinations may not be valid, check spec sheet for valid part numbers.