These stainless steel load cells are ideal for measuring in-line tension forces. Applications vary from cables on cranes, support rods in architectural designs, engine test beds, to industrial weighing applications. The LC701 Tension Link has a 6 ft. (2 m) cable while the LC711 has an integral MS style connector.
The LC701 and LC711 are also available in metric configurations, with ranges from 0-50 to 0-1000 kgf and metric threads.
Please see the LCM701 for complete details, or contact our Pressure department for more information.
SPECIFICATIONS Output: 3 mV/V ±0.25% FSO Excitation: 10 Vdc (15V max) Linearity: >100 lb: ±0.10% FSO ≤100 lb: ±0.20% FSO Hysteresis: ±0.10% FSO Repeatability: ±0.05% FSO Zero Balance: ±1.0% FSO Operating Temp. Range: -46 to 121°C (-50 to 250°F) Compensated Temp. Range: 16 to 71°C (60 to 160°F) Thermal Effects: Zero: ±0.0045% FSO/°C Span: ±0.007% rdg/°C Safe Overload: 150% of capacity Ultimate Overload: 300% of capacity Bridge Resistance: 350 Ω Full Scale Deflection: 0.025 to 0.102 mm (0.001 to 0.004") Protection?Class: IP65 Construction: Stainless steel Electrical: LC701/LCM701: 1.8 m (6') insulated 4-conductor shielded cable LC711/LCM711: DT02H-10-6P integral connector Mating connector, LC711/LCM711: PT06F10-6S, sold separately Weight: 0.45 kg (1 lb)
† All amounts shown in USD Note: All LC701/LC711 series load cells include 5 point NIST traceable calibration certificate. Mating connector for LC711 sold separately, part number PT06F10-6S, $26.50. (OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
Part Number Builder
Build Your Part Number Below
Cable or Connector Style select from: 701 for Cable Style 711 for Connector Style
select from: 100 for 100 lb range 250 for 250 lb range 750 for 750 lb range 1K for 1000 lb range 2K for 2000 lb range
Note: All combinations may not be valid, check spec sheet for valid part numbers.