MASS FLOW CONTROLLER | GAS FLOW
Electronic Mass Flow Meters & Controllers - View related products
130+ Gas Calibrations Including Pure and Mixed Gases
Pressure, Temperature, and Mass Flow Simultaneously Displayed
Easy-to-Use Pushbutton Interface
NIST Traceability Standard
Full Scale Ranges from 0.5 SCCM to 500 SLM
Response Time of 50 to 100 ms Typical
Turndown Ratio of 200:1
±0.8% Reading Accuracy
Custom Live Gas Blend Programming
Store Up to 20 User Defined Gas Blends
† All amounts shown in USD
Note: Comes complete with 24 Vdc universal power supply, 1.8 m (6') cable, 8-pin male Mini- DIN connector, operator's manual, and NIST certificate.
Standard units are calibrated to air @ 5 psig for 0 to 1 LPM, 15 psig for 2 to 10 LPM, 30 psig for 20 to 100 LPM, and 50 psig for 200 LPM and greater.
For custom calibrations, add "-(*)" to the model number, no additional cost. *Specify gas, and inlet/outlet or backpressure for custom calibrations.
Calibrations done at ambient (25°C/77°F) temperature only.
To replace the standard RS232 communications with RS485, add suffix "-RS485" to the model number, add $120 to the price.
Standard input is 0-5V, for optional 4-20 mA input add suffix "-IN" to the model number, no additional cost.
Optional secondary output are scaled the same as the primary output scale. For an alternate output scale add suffix "-T" to the model number for temperature or "-P" for pressure, no additional cost.
For units scaled in SCFH, add suffix "-SCFH" to model number, no additional cost. Please specify the desired range in SCFH.
For totalizer option, add suffix "-TOT" to the model number, add $120 to the price. Please specify resolution.
This is a 6-digit counter. Examples: For totalizing in liters with 1/100 liter resolution, the max count would be 9999.99. For totalizing in liters with 1 liter resolution, the max count would be 999999.
For a Remote Display, add suffix "-RD-*FT" to the model number, add $210 to the price. Replace the * in the suffix with the required length in whole feet, the maximum length is 3.6576 m (12'). Please note the optimum distance in feet is between 2.7 to 3 m (9 to 10').
Ethernet/IP, DeviceNet, Modbus and Profibus communications are also available for an additional charge.
Part Number Builder
Build Your Part Number Below
Max Flow select from:01
for 0.5 SCCM02
for 1 SCCM14
for 2 SCCM15
for 5 SCCM03
for 10 SCCM16
for 20 SCCM04
for 50 SCCM17
for 100 SCCM18
for 200 SCCM19
for 500 SCCM20
for 1 SLM05
for 2 SLM06
for 5 SLM07
for 10 SLM08
for 20 SLM09
for 50 SLM10
for 100 SLM11
for 250 SLM12
for 500 SLM
Output select from:Nothing(leave field blank)
for 4 to 20 mA output-I2
for Two 4 to 20 mA outputs-V2
for Two 0 to 5V Outputs-I2-T
for Two 4 to 20 mA outputs second output for temperature-V2-T
for Two 0 to 5V outputs second output for temperature-I2-P
for Two 4 to 20 mA outputs second output for pressure-V2-P
for Two 0 to 5V outputs second output for pressure-VOL
for Volumetric flow rate as standard output
Portable Version select from:Nothing(leave field blank)
for Standard -B
for Portable version of the meter (not available on models with 4 to 20 mA output)
Input select from:Nothing(leave field blank)
for 0 to 5V-IN
for 4 to 20 mA input
RS485 select from:Nothing(leave field blank)
SCFH select from:Nothing(leave field blank)
for Units scaled in SCFH
Totalizer select from:Nothing(leave field blank)
Note: All combinations may not be valid, check spec sheet for valid part numbers.