OMEGAFLEX™ Low Density Polyethylene Tubing

TYPE

^USD70.00 TYPE-1418-100

PLACE ORDER

Specific Gravity: .921
Hardness: 50 Shore D
Tensile Strength, PSI: 1600

Pumps & Mixers - View related products

Description

Polyethylene tubing is not to be used with barbed fittings due to its tendency to form stress cracks. Use compression-type fittings instead.

Specifications
Specific Gravity: .921
Tensile Strength, psi: 1600 Hardness: 50 Shore D
Elongation at Break, %: 500
Brittle Temperature: -60°C (–76°F)
Maximum Operating Temperature: 60°C (140°F)

Specifications shown are typical and are meant only as a guide. Field testing is recommended to find actual values in the given application.
Note: The listed working pressures are based on a short-term burst using a 4-to-1 safety factor.

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

TYPE-14170-500

USD132.36

Availability: 1 week

1/4 OD (in), 0.17 ID (in)

TYPE-1418-500

USD277.00

Availability: 6 weeks

1/4 OD (in), 1/8 ID (in)

TYPE-516316-500

USD290.00

Availability: 6 weeks

5/16 OD (in), 3/16 ID (in)

TYPE-516316-100

USD70.00

Availability: 6 weeks

5/16 OD (in), 3/16 ID (in)

TYPE-3814-100

USD77.19

Availability: 5 weeks

3/8 OD (in), 1/4 ID (in)

TYPE-1238-100

USD149.00

Availability: 5 weeks

1/2 OD (in), 3/8 ID (in)

TYPE-1238-500

USD615.00

Availability: 1 week

1/2 OD (in), 3/8 ID (in)

TYPE-5812-100

USD106.00

Availability: 6 weeks

5/8 OD (in), 1/2 ID (in)

TYPE-3458-100

USD89.45

Availability: 5 weeks

3/4 OD (in), 5/8 ID (in)

TYPE-7858-100

USD181.00

Availability: 6 weeks

7/8 OD (in), 5/8 ID (in)

TYPE-134-100

USD271.00

Availability: 6 weeks

1 OD (in), 3/4 ID (in)

TYPE-178-100

USD147.00

Availability: 6 weeks

1 OD (in), 7/8 ID (in)

TYPE-1141-100

USD290.00

Availability: 6 weeks

1 1/4 OD (in), 1 ID (in)

TYPE-134112-50

USD770.00

Availability: 6 weeks

1 3/4 OD (in), 1 1/2 ID (in)

TYPE-1418-100

USD70.00

Availability: 1 week

1/4 OD (in), 1/8 ID (in)

† All amounts shown in USD
Note: Specifications shown are typical and are meant only as a guide. Field testing is recommended to find actual values in the given application.
The listed working pressures are based on a short-term burst using a 4-to-1 safety factor.
Ordering Example: (1) TYPE-14170-500 1/4 OD (in), 0.17 ID (in) tubing, USD132.36