Cart  |  Contact  |  Help  |  ininfo@dwyeromega.com  | 
Toll-Free in India 000 800 442 0175
International+65 6415 5353

Fine Diameter (0.01 in. - 0.04 in.) Rugged Thermocouple Transition Joint Probes

TJ36 Series - Fine Diameters

Fine Diameter Thermocouple Transition Joint Probes | TJ36 Series - Fine Diameters

Fine Diameter Thermocouple Transition Joint Probes

  • Diameters as small as 0.25mm (0.010") !
  • Probes Available in E, J, K, N, and T Calibrations
  • 304 SS and Inconel® 600 sheaths
  • Additional Sheaths Available: 310 SS, 316 SS, 321 SS, Hastelloy® X, and Super OMEGACLAD™ XL
  • Type K and N cand be manufactured with OMEGACLAD™ Compacted Mineral Insulation Cable for Long-Lasting Performance in Harsh Conditions
  • Spring Strain Relief Prevents "Pinching" of the Wire
  • 1 m (40") Lead Length, Stripped Leads
Sensors - View related products

Description

OMEGA's fine diameter transition joint thermocouple probes provide durability and fast, accurate temperature measurements. Diameters as small 0.25mm (0.010") allow "pin-point" accuracy of measured values while protecting the measurement junction inside the metal sheathing and mineral insualtion of the OMEGACLAD™ cable . The metal transition barrel provides a solid mounting surface and the PFA insulated lead wire is a cost-effective solution for environmental temperatures to 260°C (500°F). For extended life, low drift operation at higher temperatures, choose Super OMEGACLAD™ XL sheathing, available in Type K and N calibrations.

Calibration
ANSI Code
Sheath
Materials
Sheath Dia.
mm (in.)
T/C Junction
Upper Temp.
°C (°F)
Model Number
(See notes, below)
K
CHR-
AL
304SS 0.25 (0.010)
0.50 (0.020)
0.80 (0.032)
1.00 (0.040)
500 (932)
700 (1290)
700 (1290)
700 (1290)
TJ36-CASS-010(*)-(**)
TJ36-CASS-020(*)-(**)
TJ36-CASS-032(*)-(**)
TJ36-CASS-040(*)-(**)
Inconel®
600
0.25 (0.010)
0.50 (0.020)
0.80 (0.032)
1.00 (0.040)
500 (932)
700 (1290)
700 (1290)
700 (1290)
TJ36-CAIN-010(*)-(**)
TJ36-CAIN-020(*)-(**)
TJ36-CAIN-032(*)-(**)
TJ36-CAIN-040(*)-(**)
Super
OMEGACLAD™
XL
0.25 (0.010)
0.50 (0.020)
0.80 (0.032)
1.00 (0.040)
600 (1112)
800 (1472)
800 (1472)
800 (1472)
TJ36-CAXL-010(*)-(**)
TJ36-CAXL-020(*)-(**)
TJ36-CAXL-032(*)-(**)
TJ36-CAXL-040(*)-(**)
J
Iron-
Constantan
304SS 0.25 (0.010)
0.50 (0.020)
0.80 (0.032)
1.00 (0.040)
260 (500)
260 (500)
260 (500)
260 (500)
TJ36-ICSS-010(*)-(**)
TJ36-ICSS-020(*)-(**)
TJ36-ICSS-032(*)-(**)
TJ36-ICSS-040(*)-(**)
T
Copper-
Constantan
304SS 0.50 (0.020)
0.80 (0.032)
1.00 (0.040)
260 (500)
260 (500)
260 (500)
TJ36-CPSS-020(*)-(**)
TJ36-CPSS-032(*)-(**)
TJ36-CPSS-040(*)-(**)
Notes: *Specify Junction: (G)rounded, (E)xposed or or (U)ngrounded.
**Specify length in inches: 6 for 150 mm (6 in.), 12 for 300 mm (12 in.),
Super OMEGACLAD™ XL probes (highlighted in yellow) are also available in N calibration; substitute "NN" for CA in Model Number.

View the Thermocouple Accuracy and Color Code charts
Place Order(Specify Model Number)
Part Number/Desc.
Qty
Description
TJ36-CASS-040U-6
USD74.67
Availability: 4 weeks
 
TJ36 Probe (Type K calibration) with 304SS Sheath,1.00 mm (0.040 in.) dia., 150 mm (6 in.) ength, ungrounded tip
TJ36-CASS-010G-12
USD131.17
Availability: 1 week
 
TJ36 Probe (Type K calibration) with 304 SS Sheath, 0.25 mm (0.010in.) dia., 300 mm (12 in.) length, grounded tip
TJ36-CAIN-032U-6
USD78.86
Availability: 4 weeks
 
TJ36 Probe (Type K calibration) with Inconel® Sheath, 0.80 mm (0.032 in.) dia., 150 mm (6 in.) length, ungrounded tip
TJ36-ICSS-040G-12
USD73.00
Availability: 4 weeks
 
TJ36 Probe (Type J calibration) with 304 SS Sheath, 1.0 mm (0.040 in.) dia., 300 mm (12 in.) length, grounded tip
TJ36-CAXL-032U-12
USD86.69
Availability: 4 weeks
 
TJ36 Probe (Type K calibration) with Super OMEGACLAD™ XL Sheath, 0.80 mm (0.032 in.) dia., 300 mm (12 in.) length, ungrounded tip
All amounts shown in USD
Ordering Example: (1) TJ36-CAXL-040G-6 Type K Rugged Fine Diameter Thermocouple Transition Joint Probe with PFA Stripped Lead Wire, 1 m (40 inches) length; Super OMEGACLAD™ XL sheath, 1.0 mm (.040 inch) dia., 150 mm (6 inches) length, ungrounded tip, USD81.00

Part Number Builder

Build Your Part Number Below
Option Descriptions:


(1) Lead Wire Length select from:
36 for 36 inches(standard)
CUSTOM for custom length in inches(whole number only up to 600 inches max)

(2) Thermocouple Type select from:
CA for Type K
CX for Type E
IC for Type J
CP for Type T (Not available with 010 diameter)
NN for Type N (Only available with XL and IN sheath)

(3) Sheath Material select from:
SS for 304 SS
IN for Inconel®
XL for Super OMEGACLAD™ XL (Only available with Thermocouple Type K and N)

(4) Probe Diameter select from:
010 for 0.010 in. (0.25 mm)
020 for 0.020 in. (0.50 mm)
032 for 0.032 in. (0.80 mm)
040 for 0.040 in. (1.00 mm)

(5) Junction Type select from:
E for Exposed
G for Grounded
U for Ungrounded

(6) Length select from:
6 for 6 in. (150 mm)
12 for 12 in. (300 mm)
CUSTOM for custom length in inches(whole numbers only from 2 to 120 inches)
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.