Cart  |  Contact  |  Help  | 
Toll-Free in India 000 800 442 0175
International+65 6415 5353

Thermally Conductive Epoxies and Thermally Conductive Grease

OB-100, OB-200 Epoxy Series, & OT-201 Thermal Grease

Thermally Conductive Epoxy and Grease ready to ship| Omega Engineering | OB-100, OB-200 Epoxy  Series, & OT-201 Thermal Grease

USD12.50 OB-100-1/4

RoHS
  • Thermally Conductive Epoxy
  • Electrical Insulator
  • Resist Oils, Solvents, Most Acids
  • OMEGABOND™ 100 Two Part Epoxy: Low Thermal Conductivity. Sets at Room Temp. Good to 130°C (265°F)
  • OMEGABOND™ 101Two Part Epoxy: High Thermal Conductivity. Sets at Room Temp. Good to 105°C(221°F)
  • OMEGABOND™ 200 Two Part Epoxy: Very High Thermal Conductivity. Sets in 2 Hrs at 205°C(400°F). Good to 260°C(500°F)
  • OMEGATHERM™ 201Silicone Paste: Extremely High Thermal Conductivity. Non-Adhesive. Does not Harden. Good from -40 to 200°C(-40 to 392°F
Accessories for Process Control - View related products

Description

OMEGABOND™ epoxy and OMEGATHERM™ thermal conducting paste are easy to use epoxies and silicone products. They are specially formulated for permanent bonding of thermocouples, thin film RTDs, thermistors and other temperature sensors, to most surfaces–metals, ceramics, glass, plastics, paper products. OMEGABOND™ and OMEGATHERM™ products are compounded and packaged for convenient, easy mixing and application. Each formulation exhibits important characteristics necessary for accurate, fast, reliable temperature measurement. These are: good adhesion and strength, high temperature rating, high thermal conduction, high electric insulation, thixotropic consistency, fast cure, and easy application.

OB-100 is available in 1/4 oz or 1 oz Twin Packs and 1 lb as 2 cans, 1 of resin and 1 of hardener.
OB-101 is available in 1/2 oz or 2 oz Twin Packs and 1 lb as 2 cans, 1 of resin and 1 of hardener.
OB-200 is available in a 2 oz Twin Packs or 1 lb as 2 cans, 1 of resin and 1 of hardener.
OT-201 is available in 1/2 oz or 2 oz Twin Packs or in cans as 1 lb or 2 lb (two 1 lb cans).

“Twin pak” packaging is supplied to ensure the user with accurate proportioning of resin and catalyst, as well as to provide a clean, fast means of mixing. The “Twin Pak” is a flexible, transparent plastic pouch, separated into two isolated compartments by means of a removable external divider. In one compartment is the resin, the other the pre-measured catalyst. To use, remove the divider, mix the two components by kneading the pouch, then snip off a corner to dispense. Each “Twin Pak” comes with an instruction sheet, enclosed in a clear, heat-sealed plastic envelope.

Please note that once mixed, the OB-100, OB-101 and OB-200 epoxies have the following "Working Times" (also referred to as "Pot Life"):
OB-100: Less Than 8 Minutes at Room Temperature
OB-101: Approximately 30 Minutes at Room Temperature
OB-200: Approximately 24 Hours at Room Temperature
Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
RoHS
Description
Quick Ship
Click to expand/minimize a list of what others bought with theOB-100-1/4
OB-100-1/4
USD12.50
Availability: 1 week
RoHS compliant
1/4 oz., fast room-temperature, two part epoxy
Quick Ship
Click to expand/minimize a list of what others bought with theOB-100-1
OB-100-1
USD18.25
Availability: 1 week
RoHS compliant
One 1 oz, fast room-temperature, two part epoxy
Quick Ship
Click to expand/minimize a list of what others bought with theOB-100-16
OB-100-16
USD55.00
Availability: 1 week
RoHS compliant
1 lb., fast room-temperature, two part epoxy
Quick Ship
Click to expand/minimize a list of what others bought with theOB-200-2
OB-200-2
USD26.00
Availability: 1 week
RoHS compliant
2 oz., highly conductive two part epoxy to 500°F
Quick Ship
Click to expand/minimize a list of what others bought with theOB-200-16
OB-200-16
USD111.00
Availability: 1 week
RoHS compliant
1 lb., highly conductive two part epoxy to 500°F
Quick Ship
Click to expand/minimize a list of what others bought with theOT-201-1/2
OT-201-1/2
USD18.25
Availability: 1 week
RoHS compliant
1/2 oz., thermally conductive silicone paste
Quick Ship
Click to expand/minimize a list of what others bought with theOT-201-2
OT-201-2
USD31.00
Availability: 1 week
RoHS compliant
2 oz., thermally conductive silicone paste
Quick Ship
Click to expand/minimize a list of what others bought with theOT-201-16
OT-201-16
USD185.00
Availability: 1 week
RoHS compliant
1 lb., thermally conductive silicone paste
Quick Ship
  
OT-201-32
Consult Sales  
Availability: 
 
RoHS compliant
Two 1 lb.pkgs, thermally conductive silicone paste
All amounts shown in USD
Ordering Example: (1) OB-101-1/2 1/2 oz., highly conductive, room-temperature, tow part Epoxy, USD12.50

Product Manuals:

Download OMEGABOND® Epoxy adhesive
Download OMEGABOND® Epoxy adhesive
Download Epoxy Adhesive
Download OMEGATHERM® Thermally Conductive Silicone Paste