Cart  |  Contact  |  Help  |  ininfo@dwyeromega.com  | 
Toll-Free in India 000 800 442 0175
International+65 6415 5353

Quick Disconnect Handle/Thermocouple Probe Sets with High Impact ABS or Rugged Aluminum Handles

SDX-SET and HDX-SET Series

Quick Disconnect Handle/Thermocouple Probe Sets | SDX-SET and HDX-SET Series

Quick Disconnect Handle/Thermocouple Probe Sets

USD104.00 SDX-SET-GP-J-SMP

  • Handles Supplied with 0.3m (1') Retractable Cable – Expands to 1.5m (5')!
  • In Stock with Subminiature Connector on Cable for Use with Handheld Thermometers
  • Free Mating Connector Included
  • SDX-UST Plastic Handle Accepts Both Standard and Miniature Probes/Connectors
Thermocouples - View related products

Description



General Purpose Probe:
General purpose immersion probe, 300mm 12" long, grounded junction, 1/8" O.D., 304 SS sheath. Rated to 900°C (1650°F).

Penetration Probe:
Conical tip for insertion into soft and semi-frozen material. 300mm (12") long, grounded junction, 4.5 mm (3/16") O.D. 304 SS. Tip rated to 900°C (1650°F).

Air Probe:
Exposed thermocouple element protected by 3/16" O.D. 304 SS sheath. Drilled end exposes bead to airflow for fast measurements. Constant diameter for easy insertion or mounting into duct work. 300mm (12") long. Rated to 870°C (1600°F).

Fast Response Probe:
Special reduced diameter (1/16") tip designed for fast response. Rugged 3 mm (1/8") O.D., grounded junction, 304 SS sheath. Tip rated to 900°C (1650°F).

Flexible Tip Surface Probe:
Flexible tip conforms to most surfaces for fast, repeatable, accurate measurements. Made from RTV silicone rubber for good thermal contact. 6mm (1/4") O.D. 304 SS sheath. 5/16 OD, overall. Tip rated to 260°C (500°F). Note: subjecting sensor tip to temperatures above 315°C (600°F) will result in tip damage.

Place Order(Specify Model Number)
Part Number/Desc.
Qty
Description
Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.
SDX-SET-GP-E-SMP
USD106.00
Availability: 5 weeks
 
Handle/Probe Set, SDX High Impact Plastic Handle, General Purpose Probe, E Calibration
SDX-SET-AP-J-SMP
USD232.00
Availability: 5 weeks
 
Handle/Probe Set, SDX High Impact Plastic Handle, Air Probe, J Calibration
SDX-SET-NP-E-SMP
USD135.00
Availability: 5 weeks
 
Handle/Probe Set, SDX High Impact Plastic Handle, Penetration Probe, E Calibration
HDX-SET-GP-K-SMP
USD115.00
Availability: 5 weeks
 
Handle/Probe Set, HDX Rugged Aluminum Handle, General Purpose Probe, K Calibration
HDX-SET-NP-T-SMP
USD146.00
Availability: 5 weeks
 
Handle/Probe Set, HDX Rugged Aluminum Handle, Penetration Probe, T Calibration
All amounts shown in USD

Part Number Builder

Build Your Part Number Below
Option Descriptions:


(1) select from:
SDX for SDX High Impact Plastic
HDX for HDX Rugged Aluminum

(2) select from:
GP for General Purpose Probe
NP for Penetration Probe
AP for Air Probe
RT for Fast Response Probe
FSP for Flexible Tip Surface Probe

(3) select from:
J for J Type Thermocouple
K for K Type Thermocouple
E for E Type Thermocouple
T for T Type Thermocouple
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.