SPECIFICATIONS Accuracy: 0.5% FS Linearity Error:±0.5% FS at 25°C (77°F) Repeatability:±0.1% FS Sensor Element: Piezoresistive silicon measuring cell Wetted Parts: Housing: 304 SS Seals: Cast aluminum, FKM Keypad: Polyester Film Process Connection: ¼ FNPT, G ¼F optional Electrical Connection: Plug-in, terminal strip with 14 slots for 14 AWG Power Supply: 18 to 32 Vdc, reversed polarity protected A/D Converter: Resolution: 12 bit (4096 steps per span) Scanning Rate: 1000/sec Time Constant: Approx 40 sec
Analog Output Current Output: 4 to 20 mA Load: Max RI = 600 Ω at 24 Vdc excitation Load Influence: 0.3%/100 Ω Scanning Rate: 1 msec Voltage Output: 0 to 10 Vdc Rating: Max 10 mA, short circuit-proof Adjustment Range: 25 to 100% FS
Switching Outputs Switching Function: Normally open/normally closed, analog output, standard/windows mode Contact Rating: Max 120 Vdc/ 250 Vac, max 12 W/1250 VA Cycles: 1 million @ 24 Vdc/2 A Switching Rate: Max 20/s Delay: 0.0 to 9.9 sec adjustable Operation Time: 1 msec Status Display: S1 to S4 on LCD
Digital Display Display Height: Green, 8-digit, 14-segment LCD, 12.7 mm (0.5") Bargraph: 20-segments Trend Arrows: Last value change Display Range: -9999 to 9999 Display Rate: 4 per sec Display Units: Bar, psi, psi x 10, hPa, mbar Operating Elements: Keypad with easy response push buttons Temperature Range: Media: -25 to 100°C (-13 to 212°F) Electronics: -10 to 70°C (14 to 158°F) Storage: -30 to 80°C (-22 to 176°F) Compensated Temperature Range: -10 to 70°C (14 to 158°F) Power Consumption: Approx 350 mA @ 24 Vdc (without load) Protection Class: IP65 Dimensions: 100 W x 135 H x 80 mm D (3.9 x 5.3 x 3.1") Cable Gland: 1 x PG 13.5 side entry Additional Features: Microcontroller, self monitoring, all parameters are configured by keypad, selective keypad lock Weight: Approx 32 oz (2 lb)
Order By Part Number
† All amounts shown in USD Note: Comes complete with operator's manual. To order switch with G ¼ female metric pressure fitting change model number from PSW3000 to PSW3001. No additional charge for metric fitting.