Installation Note :for HMPW-x-F
When using the rivet hole as a hold down point the maximum screw size is
3-48-NC or M2.5 x .45 Maximum Torque Value is 2 pounds-force inch or .230 kilogram-force meter .
† All amounts shown in USD Note: Types J, K, T, E, R, S and B are ANSI designations. OMEGALLOY is generically known as Nicrosil-Nisil. Note: Type U (uncompensated) connectors are used with Type B thermocouples (Pt/6%Rh-Pt/30%Rh). Ordering Example: (1) HFMPW-K-M High temperature subminiature male write-on connector with molded in ferrite core, type K calibration, USD12.00
Part Number Builder
Build Your Part Number Below
Connector Types select from: HFMPW for Male write-on connector with molded in ferrite core HMPW for Female write-on connector
Calibration Types select from: K for Calibration type K T for Calibration type T J for Calibration type J E for Calibration type E R/S for Calibration type R/S C for Calibration type C N for Calibration type N U for Calibration type U D for Calibration type D G for Calibration type G
Types select from: F for Female M for Male
ROHS select from: Nothing(leave field blank) for Non-ROHS -ROHS for ROHS
Note: All combinations may not be valid, check spec sheet for valid part numbers.