Manual and Automated Plastic Valves Ball and Diaphragm Versions - Discontinued

FVL5000 Discontinued

True Union Cartridge Ball Valves
Low Cost Actuated Ball Valves
True Union Ball Check Valves
Three Way Ball Valves
Diaphram Valves
Low Cost Ball Valves

Description

The FVL5000 Series has been discontinued. Please contact our Flow and Environmental department for possible substitutes.

OMEGA offers a wide selection of plastic valves suitable for liquid service (not for use in compressed air service).

True Union Cartridge Design Ball Valves
Cartridge design allows valve body to be easily removed from the line for simple maintenance. The valve can be turned off and then disconnected on the downstream side while the upstream side is still pressurized. PVC and CPVC have seats of PTFE backed with EPDM, and EPDM O-rings. Polypro and PVDF have seats of PTFE backed with FKM, and FKM O-rings.

Model No. PVC	Model No. CPVC	Model No. Polypro	Model No. PVDF	Pipe Size	Cv
FVL5305	FVL5305-C	FVL5105-PO	FVL5105	1/2"	11.9
FVL5307	FVL5307-C	FVL5107-PO	FVL5107	3/4"	24.5
FVL5310	FVL5310-C	FVL5110-PO	FVL5110	1"	46.8
FVL5312	FVL5312-C	FVL5112-PO	FVL5112	11/4"	70
FVL5315	FVL5315-C	FVL5115-PO	FVL5115	11/2"	112
FVL5320	FVL5320-C	FVL5120-PO	FVL5120	2"	185
FVL5325	FVL5325-C	FVL5125-PO	FVL5125	21/2"	320
FVL5330	FVL5330-C	FVL5130-PO	FVL5130	3"	430
FVL5340	FVL5340-C	FVL5140-PO	FVL5140	4"	720

Low-Cost On/Off Actuated Ball Valve
Unidirectional one-quarter-turn motor uses up to 2.2 amps of 115 Vac single phase power, 25% duty cycle, 5 second cycle tie. Motor housing (5" H x 3 1/4" L x 3" W with 1/2" FNPT electrical port) is high impact ABS plastic with NEMA-4 rating. Valves and actuators are integrally mounted and cannot be separated for replacement or repair. In clean water service, the valves are rated for 250,000 On/Off cycles. Ball seat is PTFE backed with EPDM; seals are EPDM. An optional limit switch permits feedback of valve position to confirm proper open/close valve position.

Model No. PVC Socket	Model No. CPVC Socket	Pipe Size	Cv	Weight kg (lb)	Dimension H mm (in)
FVL5803	FVL5803-C	3/8"	10	0.8 (1.75)	140 (5.50)
FVL5805	FVL5805-C	1/2"	12	0.8 (1.75)	140 (5.50)
FVL5807	FVL5807-C	3/4"	30	0.9 (2)	150 (5.90)
FVL5810	FVL5810-C	1"	47	1.1 (2.5)	159 (6.25)
FVL5812	FVL5812-C	1 1/4"	80	1.4 (3)	165 (6.50)
FVL5815	FVL5815-C	1 1/2"	140	1.4 (3)	165 (6.50)
FVL5820	FVL5820-C	2"	185	1.8 (4)	178 (7.00)

True Union Ball Check Valves
Restricts flow to one direction only. Commonly used on the inlet side of non-self-priming pumps (such as centrifugal and diaphragm metering pumps) to keep liquid in the pump drive section. These check valves are not spring assisted; they operate by gravity only and must be vertically mounted. PVC and CPVC versions have seats and seals of EPDM.

Model No. PVC	Model No. CPVC	Pipe Size
FVL5405-CK	FVL5405-CKC	1/2"
FVL5407-CK	FVL5407-CKC	3/4"
FVL5410-CK	FVL5410-CKC	1"
FVL5415-CK	FVL5415-CKC	1 1/2"
FVL5420-CK	FVL5420-CKC	2"

Diaphragm Valve
Diaphragm valves feature an abrasion-resistant and non-clog The valve closes bubble-tight, and has a top-entry design for simple in-line maintenance. Suitable for On/Off and throttling applications. position indicator is included as standard. PVC valve body available with choice of EPDM or PTFE diaphragm.

Model No. PVC/EPDM Diaphragm Socket	Cv	Model No. PVC/PTFE Diaphragm Socket	Cv	Pipe Size
FVL7805	8	FVL7805-T	8	1/2"
FVL7807	11.1	FVL7807-T	11.1	3/4"
FVL7810	17.5	FVL7810-T	17.5	1"
FVL7815	31	FVL7815-T	31	1 1/2"
FVL7820	75.4	FVL7820-T	75.4	2"

Three-Way Ball Valves
Both outlets have union connections; inlet has no union connection. All ports are socket ends. PVC and CPVC have seats of PTFE backed with EPDM and EPDM O-rings.

Model No. PVC	Model No. CPVC	Cv	Pipe Size
FVL5305-3	FVL5305-3C	5.3	1/2"
FVL5307-3	FVL5307-3C	10	3/4"
FVL5310-3	FVL5310-3C	18.2	1"
FVL5315-3	FVL5315-3C	30.5	1 1/2"
FVL5320-3	FVL5320-3C	46.6	2"
FVL5330-3	FVL5330-3C	90.5	3"

Low-Cost Ball Valves
CPVC body with socket connection. CPVC valves have seats of PTFE backed with EPDM, and EPDM O-rings. CPVC ball and water compatible O-ring stem seal.

Model No. CPVC	Cv	Pipe Size
FVL5305-CLC	12.95	1/2"
FVL5307-CLC	24.5	3/4"
FVL5310-CLC	47	1"
FVL5312-CLC	70	11/4"
FVL5315-CLC	112	11/2"
FVL5320-CLC	185	2"

Caution:
These plastic valves are manufactured to the highest quality specifications. However, due to their economical construction, they should be used only for applications where, in the event of product failure, risk of damage to equipment or personnel is minimal. User should periodically inspect the product’s performance in the actual application. Use of the products beyond the recommended capabilities and lifespan is specifically not recommended.

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

True Union Cartridge Ball Valves

FVL5415-CKC

Consult Sales

Availability:

True Union Ball Check Valve, CPVC, 1 1/2" Pipe size

FVL7815

Consult Sales

Availability: