Cart  |  Contact  |  Help  |  ininfo@dwyeromega.com  | 
Toll-Free in India 000 800 442 0175
International+65 6415 5353

4-1/2 Digit DC Voltmeter, 1/8 DIN  - Discontinued

DP3001

DC Voltmeter, 1/8 DIN | DP3001

DC Voltmeter, 1/8 DIN

  • ±19,999 Count Display Span
  • ±2 V to ±200 Vdc Ranges
  • True-Differential Input
  • 120 dB CMR, 56 dB NMR
  • 1 pA Typical Bias Current
  • 3-Wire Ratio Measurement
  • Bright, 14 mm (0.56") LED Display
  • Automatic Zero and Polarity
  • Display Hold and Test
  • 115/230 Vac Power
  • Short 104 mm (4.1") Deep 1/8 DIN Case

    Options
  • Isolated 9 to 32 Vdc Power
  • Isolated 26 to 56 Vdc Power
  • Screw-Terminal Barrier Strip
  • NEMA 4 (IP65) Splash-Proof Lens Cover

Description

From Sep 1st 2018, DP3001 Series will be discontinued. As a possible substitute, please check out the DPPt Meter or DP20 Meter for details.

The DP3001 is a low-cost, true-differential 4-1/2 digit panel meter for applications that require high resolution and high accuracy DC measurement. It fits a standard 1/8 DIN panel cutout and requires a depth of less than 104 mm (4.1") behind the panel. Display span is ±19,999 counts. Accuracy is 99.98%.

INPUT RANGES
The DP3001 offers DC voltage ranges of ±1.9999, ±19.999 and ±199.99 Vdc. By using an external DC voltage reference, any of these ranges can be configured for 3-wire ratio measurement.

OPTIONS
The meter can be electrically configured for three input voltage ranges, four decimal-point positions, high-impedance 3-wire ratio input. Mechanical options include a screw-terminal barrier strip for signal and power and a splash-proof lens cover which meets NEMA 4 (IP65) requirements.

SPECIFICATIONS
Noise Rejection
NMR, SIG HI to SIG LO: 56 dB, 50/60 Hz
CMR, SIG LO to ANA GND: 86 dB, DC to 60 Hz
CMR, AC GND to ANA GND: 120 dB, DC to 60 Hz
CMV, SIG LO to ANA GND: ±1 Vp
CMV, AC GND to ANA GND: 1500 Vp per HV test, 354 Vp per IEC spacing
3-Wire Ratio Reference
Analog Input Range: ±2, ±20, ±200 V
External Reference Input: +0.5 to +2.0 V
Load on Reference, Std: 6 kΩ
Load on Reference, Opt: 100 MΩ
Accuracy: 99.98%
Analog Input
Configuration: Differential, bipolar
Zero: Automatic
Span Adjustment: ±5%
Analog-to-Digital Conversion
Technique: Dual-slope, average-value
Polarity: Automatic
Signal Integration Period: 100 ms
Read Rate: 2.5/s
Accuracy at 25°C
Maximum Error: ±0.01% of reading ±2 counts
Span Tempco: ±0.01% of reading/°C
Step Response: 1s
Warmup to Rated Accuracy: 10 min
Display
Type: 7-segment, red LED
Height: 14 mm (0.56")
Symbols: -1.8.8.8.8
Decimal Points: Four positions selectable by jumpers from front panel or at connector, 10 mA sink
Overrange Indication: Four least-significant digits flash
Digital Inputs
HOLD and TEST Inputs: TTL or 5 V CMOS compatible
Blanking Input: Open-collector compatible
Power
AC Voltages: 115 or 230 Vac ±15%
AC Frequency: 49 to 440 Hz
DC Voltages: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc, isolated to 300 Vp
Power Consumption: 2.5 W
Output Voltages: 4.7 Vdc and -4.6 Vdc ±5%,10 mA max
Environmental
Operating Temperature: 0 to 60°C
Storage Temperature: -40 to 85°C
Relative Humidity: 95% at 40°C (non-condensing)
Mechanical
Bezel: 96 W x 48 H x 5.1 mm D (3.78 x 1.89 x 0.20")
Depth Behind Bezel: 104 mm (4.1")
Panel Cutout: 92 W x 45 mm H (3.62 x 1.77")
Weight: 14 oz (400 g)
Case Material: 94V-0 UL-rated polycarbonate
Place Order(Specify Model Number)
Part Number/Desc.
Qty
Description
DP3001-3
USD388.00
Availability: 2 weeks
 
4-1/2 digit voltmeter, ±1.9999 Vdc input range, 115 Vac power. Standard features include auto-zero, auto-polarity, display hold, includes PCB edge connector for power, signal and display hold.
DP3001-4
Consult Sales  
Availability: 
 
 
4-1/2 digit voltmeter, ±19.999 Vdc input range, 115 Vac power.
DP3001-4,D4
Consult Sales  
Availability: 
 
 
4-1/2 digit voltmeter, ±19.999 Vdc input range, 115 Vac power, with D4 connector/screw terminal barrier strip.
DP3001-4,C3C,D4
Consult Sales  
Availability: 
 
 
4-1/2 digit voltmeter, ±19.999 Vdc input range, 9-32 Vdc power, with D4 connector/screw terminal barrier strip.
DP3001-5
Consult Sales  
Availability: 
 
 
4-1/2 digit voltmeter, ±199.99 Vdc input range, 115 Vac power.
All amounts shown in USD

Part Number Builder

Build Your Part Number Below
Option Descriptions:


(1) Model select from:
DP3001 for 4-1/2 digit DC voltmeter

(2) Input Range select from:
-3 for ±1.9999 Vdc
-4 for ±19.999 Vdc
-5 for ±199.99 Vdc

(3) 3-Wire Ratio Input Impedance (DC input) select from:
Nothing(leave field blank) for Standard
-HZ for High impedance (100 mOhm)

(4) Decimal Point select from:
Nothing(leave field blank) for Programmable at D1 connector
-DP1 for 1.9999 internally-wired
-DP2 for 19.999 internally-wired
-DP3 for 199.99 internally-wired
-DP4 for 1999.9 internally-wired

(5) Power options select from:
Nothing(leave field blank) for 115 Vac 50/60 Hz power
-C1 for 230 Vac 50/60 Hz
-C3C for Isolated 9 to 32 Vdc
-C3E for Isolated 26 to 56 Vdc

(6) Add-On Option select from:
Nothing(leave field blank) for red LED display
-G for Green LED display

(7) Add-On Option select from:
Nothing(leave field blank) for no option
-D4 for Screw-terminal barrier strip for power and signal (removes power and signal from D1) DP301AN only.
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.