To order a model B or S DialTemp utilize the "To Order" box or the "Partnumber Builder" below which reflects the most popular models.
Many additional models are also available. Just review the pdf file in "Related Links" below.You can then use "Order By Partnumber" table to order a non-standard one. Even if the part number you select does not come up with a valid price it may be available!
Order By Part Number
† All amounts shown in USD Ordering Example: (1) S-0-250F-4-1/2 5 Inch Diameter Dial Thermometer,0 to 250F, Stem Length 4 inches, 1/2 inch NPT fitting, USD101.00
Part Number Builder
Build Your Part Number Below
Series select from: B for B Series (w/External reset) S for S Series
Temperature Range select from: -100-100F for -100 to 100°F -80-120F for -80 to 120°F -40-160F for -40 to 160°F -20-120F for -20 to 120°F 0-100F for 0 to 100°F 0-140F for 0 to 140°F 25-125F for 25 to 125°F 0-150F for 0 to 150°F 0-200F for 0 to 200°F 0-220F for 0 to 220°F 0-250F for 0 to 250°F 0-300F for 0 to 300°F 20-240F for 20 to 240°F -50-300F for -50 to 300°F 50-300F for 50 to 300°F 50-400F for 50 to 400°F 50-500F for 50 to 500°F 50-550F for 50 to 550°F 50-750F for 50 to 750°F 100-800F for 100 to 800°F 150-750F for 150 to 750°F 200-1000F for 200 to 1000°F 100-200F for 100 to 200°F -70-150F for -70 to 150°F 200-300F for 200 to 300°F 300-400F for 300 to 400°F -50-200C for -50 to 200°C -50-100C for -50 to 100°C -50-50C for -50 to 50°C -40-160C for -40 to 160°C -30-30C for -30 to 30°C -20-120C for -20 to 120°C -10-110C for -10 to 110°C 0-50C for 0 to 50°C 0-100C for 0 to 100°C 0-150C for 0 to 150°C 0-200C for 0 to 200°C 0-300C for 0 to 300°C 0-400C for 0 to 400°C 100-500C for 100 to 500°C -80-220C for -80 to 220°C -20-220C for -20 to 220°C 0-30C for 0 to 30°C 0-60C for 0 to 60°C 0-250C for 0 to 250°C 50-450C for 50 to 450°C 100-550C for 100 to 550°C
Stem Length select from: 21/2 for 2 in 4 for 4 in 6 for 6 in 9 for 9 in 12 for 12 in 15 for 15 in 18 for 18 in 24 for 24 in 30 for 30 in 36 for 36 in
Thread select from: 1/4 for 1/4 NPT 1/2 for External Reset 1/2 in NPT
Note: All combinations may not be valid, check spec sheet for valid part numbers.
All Bi-Metal Stem Thermometers, (DialTemp) Pricing Information