Cart  |  Contact  |  Help  |  ininfo@dwyeromega.com  | 
Toll-Free in India 000 800 442 0175
International+65 6415 5353

Programmable Step Motor Indexer/Drive

3540i

Programmable Step Motor Indexer/Drive | 3540i

Programmable Step Motor Indexer/Drive

USD850.00 3540i

CE
  • Provides Up to 3.5 A per Phase and Microstepping to 50,800 Steps per Revolution
  • Accepts 12 to 42 Vdc Power Supply
  • Connects by a Simple Cable to Your PC for Programming (Cable Included)
  • Microsoft Windows™-Based Software for Easy Set up and Programming
  • 8 Inputs, 3 Outputs
  • Optional Man Machine Interface (MMI) Allows Operator to Enter Distances, Speeds, Loop Counts and More
  • Compatible With Multi-Axis Controller HUB 444
  • Optional encoder + RS485 daughterboard
  • Sample Motion Programs Available by Request
Drives & Motors - View related products

Description

The 3540i is a programmable step motor driver suitable for a wide range of motion control applications. It includes a sophisticated controller integrated with a 140 watt microstepping amplifier. The 3540i includes Applied Motion's easy to use Si Programmer™ Windows software for the rapid development of stand-alone motion control programs. The 3540i can also be commanded in real time from a host PC or PLC, using the Si Command Language™ (SCL). SCL allows for control via serial commands sent from a host device such as a PC or PLC. This permits the user to perform a variety of motion, I/O, and system status tasks in real time via a host serial device.

For multi-axis applications, up to 4 Applied Motion Si™ drives (stepper or Servo) can be networked using a single SiNet™ Hub. The 3540i includes 8 optically isolated programmable inputs for triggering, branching, position sensing and end of travel detection. 3 optically isolated programmable outputs can send signals to other electronic devices and activate relays. A daughterboard is available which provides an encoder input as well as an RS485 interface.

Si Programmer
Intended for use in stand-alone applications, Si (Simple Indexer) Programmer provides quick, out-of-the-box use with an extremely friendly, point-and-click graphical interface that does not require any software programming experience. Once an Si program has been constructed and downloaded to the drive, the program can be executed stand-alone at power-up or from an external trigger. Constructing a program is accomplished through the use of instructions selected in a point-and-click manner. Once an instruction is selected, a "fill in the blanks" format is used to input parameters.

Constructing an Si program requires no prior programming experience nor does it require learning a programming language. Si Programmer generates the actual motion control program, based on user selected parameters, thereby eliminating syntax errors. Once created, programs are easily downloaded, uploaded, saved and printed.

Si Programmer also provides the capability to control digital inputs and outputs, useful for interfacing with external equipment like PLCs, sensors, end-of-travel switches, and more. Si Programmer has found success in all types of applications, from simple linear actuator applications to complete machine control with operator interface applications.
Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
Description
  
3540i
USD850.00
Availability: 1 week
 
Programmable step motor index drive
Recommended Motors
  
OMHT17-075
USD145.00
Availability: 11 weeks
 
NEMA 17, 62.8 oz-in holding torque
  
OMHT17-275
USD106.63
Availability: 5 weeks
 
NEMA 17, 62.3 oz-in holding torque
  
OMHT17-278
USD126.09
Availability: 3 weeks
 
NEMA 17, 113 oz-in holding torque
  
OMHT23-393
Consult Sales  
Availability: 
 
 
NEMA 23, 76.6 oz-in holding torque
  
OMHT23-593
USD126.09
Availability: 5 weeks
 
NEMA 23, 79.3 oz-in holding torque
  
OMHT24-100
USD142.00
Availability: 5 weeks
 
NEMA 24, 123 oz-in holding torque
  
OMHT23-397
Consult Sales  
Availability: 
 
 
NEMA 23, 177 oz-in holding torque
  
OMHT23-597
USD140.45
Availability: 9 weeks
 
NEMA 23, 177 oz-in holding torque
  
OMHT23-400
Consult Sales  
Availability: 
 
 
NEMA 23, 264 oz-in holding torque
  
OMHT23-600
USD207.00
Availability: 1 week
 
NEMA 23, 264.8 oz-in holding torque
Double Shaft Motors (required for encoder mounting)
  
OMHT17-075-D
USD157.00
Availability: 17 weeks
 
NEMA 17, 62.8 oz-in holding torque, double shaft
  
OMHT17-275-D
USD117.00
Availability: 5 weeks
 
NEMA 17, 62.3 oz-in holding torque, double shaft
  
OMHT23-393-D
Consult Sales  
Availability: 
 
 
NEMA 23, 76.6 oz-in holding torque, double shaft
  
OMHT23-593-D
USD136.00
Availability: 5 weeks
 
NEMA 23, 79.3 oz-in holding torque, double shaft
  
OMHT24-100-D
USD153.00
Availability: 5 weeks
 
NEMA 24, 123 oz-in holding torque, double shaft
  
OMHT23-397-D
Consult Sales  
Availability: 
 
 
NEMA 23, 177 oz-in holding torque, double shaft
  
OMHT23-597-D
USD137.00
Availability: 1 week
 
NEMA 23, 177 oz-in holding torque, double shaft
  
OMHT23-400-D
Consult Sales  
Availability: 
 
 
NEMA 23, 264 oz-in holding torque, double shaft
  
OMHT23-600-D
USD216.00
Availability: 5 weeks
 
NEMA 23, 264.8 oz-in holding torque, double shaft
Accessories
  
ENC-1000-175
Consult Sales  
Availability: 
 
 
Accessory daughterboard for Encoder inputs + RS485 comm
  
ENC-1000i
Consult Sales  
Availability: 
 
 
Differential encoder for NEMA 11/14/17 motors, 1000-line, with index pulse
  
ENC-1000i-23
Consult Sales  
Availability: 
 
 
Differential encoder for NEMA 23/24 motors, 1000-line, with index pulse
  
ENC-CA-4217-6FT
Consult Sales  
Availability: 
 
 
Encoder cable, 2 m (6')
  
ENC-CA-4217-10FT
Consult Sales  
Availability: 
 
 
Encoder cable, 3 m (10')
  
ENC-CA-4217-20FT
Consult Sales  
Availability: 
 
 
Encoder cable, 6 m (20')
  
MMI-01
Consult Sales  
Availability: 
 
 
Operator Interface
  
HUB 444 DIN RAIL
Consult Sales  
Availability: 
 
 
Multi-axis network hub with DIN rail mounting kit
Click to expand/minimize a list of what others bought with theOM-CONV-USB
OM-CONV-USB
USD30.02
Availability: 1 week
 
USB to RS232 Interface Converter; USB-A to DB9-male
Click to expand/minimize a list of what others bought with theOMPS150A24
OMPS150A24
Consult Sales  
Availability: 
 
 
Stepper drive power supply, 24 VDC, 6.3A
  
Power Cord-SE
USD15.50
Availability: 4 weeks
 
AC Power cord with stripped end termination
  
SI-PROG-CBL
USD39.00
Availability: 1 week
 
Replacement programming cable (comes with drive)
  
DRIVE-CBL
Consult Sales  
Availability: 
 
 
Replacement MMI and/or HUB communications cable (comes with MMI-01 and HUB 444)
  
DSUB-9-MF
Consult Sales  
Availability: 
 
 
DIN rail interface module, 9-pin
  
DSUB-25-MF
Consult Sales  
Availability: 
 
 
DIN rail interface module, 25-pin
  
DSUB-9-MF-CBL
USD60.00
Availability: 1 week
 
DSUB cable, 9-pin, 2 m (6.6'), male/female connectors
  
DSUB-25-MF-CBL
USD81.00
Availability: 1 week
 
DSUB cable, 25-pin, 2 m (6.6'), male/female connectors
All amounts shown in USD
Note: Programming cable included. Software is a free download; click on "Software" icon below the picture. To see torque-speed curves for recommended motors, click on "Specs" above.
Ordering Example: (1) 3540I Programmable step motor indexer/drive, USD850.00  plus (1) OM-CONV-USB USB to RS-232 Interface Converter, USD30.02  plus (1) OMHT17-075 NEMA 17 stepper motor, 62.8oz-in holding torque, USD145.00 , USD850.00 + 30.02 + 145.00 = USD1,025.02

Product Manuals:

Download 3540i Series - Programmable Step Motor Driver
Download STM, ST, Stac6, 1240i, 3540i, si3540 Series - Si Command Language (SCL) for Stepper Drives
We noticed you are from the US. Visit your local site for regional offers and live support.