Cart  |  Contact  |  Help  |  ininfo@dwyeromega.com  | 
Toll-Free in India 000 800 442 0175
International+65 6415 5353

Molten Metal Ceramic Sheath Thermocouple

NEP-TX Series

Molten Metal Ceramic Sheath Thermocouple | NEP-TX Series

Molten Metal Ceramic Sheath Thermocouple

USD2,030.00 NEP-TX-K-PTRS-1628-475

  • Up to 1250°C (2282°F) Temperature Rating
  • For Use in Molten Non-Ferrous Metals
  • Connection Head with Terminal Block
  • Custom Probe Lengths Available
  • Available in Dual Element
  • High Temperature Thermal Shock Resistance
  • Corrosion Resistance
  • 1¼ NPT Mounting Thread Standard
Thermocouples - View related products

Description

OMEGATITE™ 650 is the ceramic sheath which is an alloy of silicon nitride and aluminum oxide. This superior refractory material has the combined properties of silicon nitride (high strength, hardness, fracture toughness, and low thermal expansion) and aluminum oxide (corrosion resistance, chemically inert, high temperature capabilities, and oxidation resistance). Not recommended for caustic solutions and hydrofluoric acid.

Most refractory products can be used only in high temperature applications where one or two of the following properties are required: thermal shock resistant, mechanical strength, corrosion resistance, abrasion resistance or electrical insulation. OMEGATITE™ 650 combines all these properties in one refractory material. Preheating of the process is not necessary.

OMEGATITE™ 650 is uniquely qualified for non-ferrous molten metal applications and high wear or high impact environments up to 1250°C (2282°F).

OMEGATITE™ 650 is non-wetting for most non-ferrous metals. It is gas tight, chemically inert, resistant to corrosion and metal attack, and features high strength, hardness, and thermal shock resistance.

OMEGATITE™ 650 thermocouple sheaths are used extensively for continuous measurements in nonferrous metals. In molten aluminum, OMEGATITE™ 650 is thermally shock resistant, nonwetting, does not contaminate the melt, provides continuous, reliable temperature measurement, and is resistant to degradation even in aggressive aluminum lithium alloys.
Place Order(Specify Model Number)
Part Number/Desc.
Qty
Description
NEP-TX-K-PTRS-1628-475
USD2,030.00
Availability: 7 weeks
 
Type K Probe, 475mm (18.75in.) length, 28mm (1.10 in.) diameter
NEP-TX-N-PTRS-1628-475
Consult Sales  
Availability: 
 
 
Type N Probe, 475mm (18.75in.) length, 28mm (1.10 in.) diameter
All amounts shown in USD
Note: Ceramic tube packaged separately to avoid breakage during shipping. Shipped unassembled.

Part Number Builder

Build Your Part Number Below
Option Descriptions:


(1) Select Calibration select from:
K for Type K
N for Type N

(2) Select Probe Length (in increments of 150mm) select from:
475 for 475mm (18.75in.) - Standard Length
CUSTOM for Select a custom length in increments of 150mm (6 in.)

(3) -DUAL select from:
Nothing(leave field blank) for Standard Configuration
-DUAL for Dual Element
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.