Cart  |  Contact  |  Help  |  ininfo@dwyeromega.com  | 
Toll-Free in India 000 800 442 0175
International+65 6415 5353

MultiFunction Meter for Batch Control, Rate Indication and Totalization - Discontinued

DPF5100

MultiFunction Meter for Batch Control, Rate Indication and Totalization | DPF5100

  • 5 Year Warranty
  • Frequency Ratemeter
  • Frequency Ratio
  • Up or Down Totalizer/ Batch Controller
  • RS-232C and HI, LO and GO Open-Collector Outputs Standard
  • Analog Output for Rate or Total (Optional)

Description

DPF5100 rate meter is discontinued. Please see the DPPT Panel Meter or DPF20 as a possible alternative or contact our Customer Engineering department for details.

The DPF5100 microprocessor-based, 6-digit, 1 /8 DIN panel instrument can be configured by front-panel keys or by a personal computer as a frequency meter/ tachometer, frequency-ratio meter, period/ period-average meter, time-interval/ time-interval-average meter, reset stopwatch, and cumulative timer or totalizer/1-stage batch controller. However, the DPF5100 display cannot toggle between rate and total. Two signal inputs can be used to provide frequency ratio or time-interval measurements.
Five Operating Modes
In the frequency meter, the minimum display update rate is equal to 1 period of the frequency input. Thus, very low frequency measurements are displayed and updated faster than most conventional frequency meters. Only two sensors are required to measure the rate of a moving object. The DPF5100 can be set up as frequency-ratio meter, ideal for monitoring flow ratios. The DPF5100 can be set up as an up or down totalizer/1-stage batch controller at rates up to 7 MHz. The display capacity is –99,999 to 999,999 counts with exponential format up to 9.99 E9. Upon ac power loss, the latest reading is automatically saved in non-volatile RAM and is restored upon return of power.
All amounts shown in USD
We noticed you are from the US. Visit your local site for regional offers and live support.